How did you define your animal feed pellet machine model as 250 / 320 / 350 /420 / 508, etc. ?
The model is defined based on the diameter of the ring die mould. For example, mould 250 means that the diameter of the ring die is 250 mm.
If we only buy one set of cattle feed machine, could we produce feed for different kind of animal and poultry ?
Yes. of course. What we need to do is just have different size of ring die mould according to the requirement of different animal and poultry. and the replacement of the ring die mould is very easy.
What kind of raw material that the ring die mould is made of ?
There are two kinds of ring die mould in the market. one is made of carbon steel, the other is made of stainless steel. the former is cheaper than the latter. We adopt stainless steel ring die and press roller sheel in our machine.
Is it possible that we only buy one set of feed pellet machine to produce animal feed? without other equipment ?
Should to say : Yes, It's possible. But you'd better find the proper way to load and mix the raw material. otherwise, you will have to do such jobs by hands.
What is the suitable moisture (water content) of the raw material that easy to make feed pellet ?
The ideal moisture range is from 15% to 18% .
What brand of motors you used in the machine ?
We use Siemens brand motor in our machine. please rest assured about the quality.
What about the power, capacity, size and weight of the poultry feed manufacturing machine ?
Please refer to the above technical parameter table to get the detail, If you want the details of our smaller size of poultry feed manufacturing machine.
Will you dispatch engineer to install the cattle feed machine (production line) ?
Yes. we will dispatch engineer to do the service just based on the requirement of customers.
Where is your factory located? how could I get there ?
Our factory is located in Zhengzhou, Henan, China. It's 30 km far from the airport. we will pick you up at the airport.
Why should we make pellet feed ?
1) Pelletized feed have a 145% higher conversion ratio. Scientific nutrition formula, sterilization and cooking pelleting processing technology, rich and mellow flavor, and easy to absorb, Improve the yield and quality of livestock products, shorten the breeding cycle.
What is pellet making machine?
Pellet making machine is also known as pellet mill and pellet machine. It uses roller and ring die to press feed/biomass materials into solid pellets, which is an excellent fuel for heating and feed pellets for animals.
What are biomass pellets made from?
Biomass pellets can be made from wood, sawdust, wood powder, rice straw, wheat bran, cotton stalk, corn cob and other agriculture and forestry wastes.
What’s the size of biomass pellets?
The thickness of biomass pellets depends on the diameter of holes on ring die, which is from 2.5 to 10mm. The length of biomass pellets is adjustable with a slicer equipped under the ring die.
Where are biomass pellets used?
Biomass pellets are high-efficiency and environmental-friendly fuel. They are widely applied for cooking range, home heating, heat-supply system, industrial boiler, and thermal power plant.
How much is a pellet making machine?
The price of pellet making machines varies according to their capacities. You can consult our sales for specific price.
When and how do you deliver your products?
The products will be delivered 15-30days after the payment. Transportation is available by sea, land and air.
Do I need to pretreat raw materials before making pellets?
Yes, only raw materials with certain size and moisture content can be fed into pellet making machine. The diameter should be between 3-5 mm, moisture between 10%-20%.
Can feed pellet machine be used for making biomass pellets?
No. Feed pellet machines are designed to make animal feed pellets. Although they are able to process soft biomass materials like leaves, grass and sawdust, we recommend you to use specialized biomass pellet making machine for biofuel pellets production.
What’s the difference between flat die and ring die of pellet making machine?
Richi Machinery produce flat die pellet making machine and ring die pellet making machine. The former one is a standard version, suitable for home use and newcomers. The latter one is a pro version. With more lager productivity and higher price, it is suitable for users who has larger production needs and budget.
How to exam and maintain die and roller?
Check the clearance between roller and die and abrasion of them if you find any production drawdown of pellet making machine. The clearance between roller and die should be between 0.1-0.5mm.