.jpg)
Analysis of the status of feed mixer in feed industry.
Author:RICHi Time:2016-04-20
Mixing is a key working procedure in the production of mixed feed, which will be combined with a variety of materials, and it is the main link to ensure the quality of feed and feed efficiency. At the same time in the feed pellet mill, the productivity of the mixing machine determines the size of the plant. As a result, the mixer is one of the key equipments in feed industry.
Livestock and poultry feeding practices show that, with the feed of various components if uneven mixing, will significantly affect animal growth and development, to a lesser extent, reduce the effect of feeding, caused severe deaths of livestock.
General in the feed factory, there are two types of mixing are as follows:
Pre mixed: trace elements needed for a variety of animals, including vitamins, minerals, antibiotics, amino acids, drugs, and carrier (diluent) pre mixed. Its purpose is to trace raw materials without affecting the uniform distribution, shorten the full price cycle with mixed feed.
At the final stage of the mixture: a variety of feed ingredients, according to the requirements of raw materials ratio, metering feed, into the mixing machine, made of animal growth needs of the full price of feed.
The so-called mixed, is under the effect of external forces, all kinds of materials are mixed with each other, so that in any volume of each component of the particle uniform distribution. Mixed with different methods. In technology, one of the most commonly used methods are: (1) mixing; II rotary mixing barrel rotary mixing; the jet mixing; (4) by compressed air, steam or liquid mixed, with to vibration and ultrasonic effect complete mixing. The first three methods for fourth kinds of methods for mechanical, pneumatic, and finally a method for eddy current or impulse.
In the feed production process, the use of mechanical mixed feed, especially in mixing widely used.